depth control

Application of Depth Control System for Pavement Miller

路面铣刨机深度控制系统应用技术

互联网摘选

On the background of the develop of the acoustic survey device, this paper aims to study and develop its orientation and depth control subsystem.

本论文以某军用水声测量装置的研制为背景，深入研究开发了其中的回转定深控制系统。

互联网摘选

Realization of the I-PD intelligent depth control system with a microcomputer

智能式I-PD定深控制器的微机实现

互联网摘选

As to scratching, there are three modes: height mode , deflection mode and depth control.

刻划过程目前有三种模式: 恒力 、 恒高、深度可控.

互联网摘选

In this article the profiling of depth control wheel on the ridge culture field is analysed.

从理论上对垄作式限深轮进行了仿形分析。利用限深轮，使甜菜播种深度控制在3cm为宜。

互联网摘选

The water-poured well depth control technology is one of effective solution methods.

注水井深度调剖技术是有效的解决手段之一.

互联网摘选

Research of depth control system of milling equipment in hot reproducer on the spot

就地热再生机组铣刨装置深度控制系统的研究

互联网摘选

A fault diagnosis method which applies the RBF ( radial basis function) NN to the torpedo depth control system is provided.

文中研究了将RBF（径向基）网络应用于鱼雷深度控制系统的故障诊断方法。

互联网摘选

Its control structure is a forward zipper with preferential seek for monotonous depth.

其控制结构是向前和混合拉链，单调深度优先查找。

互联网摘选

From the result of the simulation experiments we can find that fuzzy control for depth control has better control result.

通过仿真实验结果可以看到，对于Outland1000水下机器人垂向上的定深控制，模糊PD的控制方法可以获得较好的控制效果。

互联网摘选

Application of Computer Automatic Discriminating Technology to the Depth Control of Perforation

计算机自动识别技术在射孔深度控制上的应用

互联网摘选

Mixing Depth Control System of Stabilizer

稳定土拌和机拌深控制系统

互联网摘选

The Application of Kalman Filtering to a Certain Depth Control System

卡尔曼滤波在某深控系统中的应用

互联网摘选

Analysis and Application of Depth Control Error During Torpedo Turn at Required Depth

鱼雷定深旋回时深度误差分析及应用

互联网摘选

It also gives out the control decision table, taking an example of depth control Simulation results show the feasibility of the summarized principles.

本文以深度控制为例给出了控制决策表，仿真结果表明了该方法的正确性。

互联网摘选

Simulation of Robust H ∞ Controller for AUV Depth Control

自治水下机器人深度的鲁棒H∞控制仿真

互联网摘选

Model Predictive Depth Control of an Autonomous Underwater Vehicle

模型预测控制在自主式水下航行体控制系统中的应用

互联网摘选

By thermal printing head control the characteristics of the ARM host processor hardware resources in-depth analysis, based on a simplified system design, improving system integration and reliability, to facilitate system software development principles, to determine the hardware selection of the printer driver and program determined.

通过对热敏打印头控制特点以及ARM主控芯片硬件资源的深入分析，基于简化系统设计、提高系统集成度和可靠性、方便系统软件开发的原则，确定了打印驱动的硬件选型和方案的确定。

互联网摘选

Combining depth-averaged numerical seepage flow model and 2-dimensional profile seepage flow model, seepage rate, seepage velocity field and hydraulic gradient of seepage control work in left abutment of Shawan hydropower station have been obtained.

采用深度平均渗流模型结合2维立面渗流模型，对沙湾水电站左岸坝肩“地窗式”防渗方案进行了渗流量、渗流场及渗透坡降的计算；

互联网摘选

Depth control wheels-to ensure a uniform depth of the drip lines embedding.

深度控制轮 — 确保滴灌管掩埋深度一致.

互联网摘选

The Simulation and Design of Microprocessor Control System for Buoyancy Adjustment and Depth Control of a Submersible

潜器浮力均衡与自动定深微机控制系统的仿真与设计

互联网摘选

Laser control technique and load-sensing hydraulic system are combined into the trench depth control, that is, the laser depth control system.

把激光控制技术与负荷传感液压系统共同应用在沟深的控制上，即激光定深系统。

互联网摘选

Influence of the torpedo body characteristic on the step response of the inertial depth control system

鱼雷雷体特性对其惯性深控系统阶跃响应的影响

互联网摘选

Auto creasing depth control system.

全自动压痕深浅系统。

互联网摘选

Research of Variable Structure Control Method on A Near-Surface Submarine in Depth Control

潜艇近水面定深航行时的变结构控制方法研究

互联网摘选

A Method of Fault Depth Control for AUV based on Redundancy Management

基于冗余管理的水下航行器深度容错控制方法

互联网摘选

The article gives a technical and theoretical description about the operation principle of gear cutting of circular gear, and analyses the control process of gear cutting depth which is technologically advanced in application.

对圆弧齿轮切齿的工作原理作了详尽的技术理论描述，指出切齿深度的控制过程，具有很强的技术性。

互联网摘选

Install the accelerometer on the disc centrifuge with temperature-controlled cabinet, change the temperature of control box to change working environment temperature of the accelerometer, do the depth exploration of accelerometer performance in the range of ± 50 ℃ and establish the accelerometer temperature error model.

将加速度计安装在带有温控箱的盘式离心机上，通过改变温控箱的温度来改变加速度计的工作环境温度，研究加速度计在±50℃范围内的工作性能并建立加速度计温度误差模型。

互联网摘选

The Control of cables usually means the depth control, which has been more and more regarded as the appearance of high precision exploration.

拖缆本身的控制一般是指拖缆的定深控制，随着高精度海洋勘探的出现而逐渐被人们重视。

互联网摘选

The depth control system in road miller and work elements were analyzed, and the physical model of milling drum was made and the control method was put forward.

阐述了路面铣刨机深度控制系统的组成及工作原理，建立了路面铣刨机的铣削滚筒工作的数学模型，提出了路面铣刨机深度控制系统的控制方法。

互联网摘选